Examination Delivery Bed YSOT-CC90A

1、General Description：

This bed is designed for women’s Obstetric and gynecological operation. Its raising, lowering ,reversed trendelenburg and trendelenburg and folding movement of the back section of the table-top are all conducted electrically and controlled by buttons. It is characterized by versatility, easy operation, safety and reliability.

2、Specifications：

Dimensions of Table Top：

Overall length………………………………………………………………1900mm

Width…………………………………………………………………………600mm

Length…………………………………………………………………………550mm

Width …………………………………………………………………………490mm

Table Top from floor：

Max. Height………………………………………………………………1000mm

Min. Height……………………………………………………………………750mm

Range of movements：

Back section raised from the horizontal…………………………………≥55°

Reversd Trendelenburg……………………………………………………≥12°

Trendelenburg…………………………………………………………………≥12°

Lifting speed…………………………………………………………………………3～16mm/s

Safe Working Load………………………………………………………………………135kg

Supply： AC220±10％，50Hz±1Hz

Internal electric source:（DC）24V  Battery capacity ≥ 2.4AH

Device safety sort：I  B

Ingress Protection：IPX4  

3、Obstetric bed composition：

The Obstetric bed is composed of the mechanism and the electrical control system.

The mechanism is composed of the bed body, the leg frame, the contaminative basin, the auxiliary equipment and so on, the electric appliance control system is composed of inside controller, the transmission system, handle controller and so on.

4、Operation Instruction：

1）The ascending and descending movements, reversd trendelenburg , trendelenburg and folding movement of the back section of the table-top are all electrically operated. It has a moving controlling push button container attached. The controlling push button are all dot buttons, when the necessary button is rushed, the corresponding motor will work, when the button is not pressed, all movements stop.

2）The assistant table of Obstetric bed can be drew out and drew in, it is easy to operate and have function of rise and fall, it improves the operation stability when the operating appliances is placed and doctor's hand is propped up.

3）In addition to general function, the Obstetric bed also can be adjusted seat posture so as to adjust various childbearing body position, it can be changed into Obstetric bed as needed in the process of childbearing, don't need to move a pregnant woman, so it can reduce the pregnant woman's disease bitterness and improve the space utilization of the hospital.

4）The contaminative basin can prevent the amniotic fluid leaks, it is easy to assemble and disassemble

5）The design of the seat section causes doctor to be easier to close to pregnant woman, so it is easy to operate.

6）Movement of the table：

The motion idler wheel is installed in the pedestal of the operating table, it can be locked to the ground when trampling the side pedal, it can move around when tramping the other side pedal.

7)  Electric operating table mattresses are produced by the high-density sponge covered leatherette materials.

8） The Company will be able to provide circuit draws in accordance with users’ needs.

9）When you need to replace the fuse, use a screwdriver to remove the fuse, replace fuses with the model, as it is mounted.

5、Accessories：

Accessories are all removable. when used simply fixed slider or locking of the attachment into the side track of the operating table, insert the attachment, adjusting the position, tighten the handle and then can fix to the attachment.