Portable or mobile Vet Anaesthesia Machine YSAV120V1

Ø1. Compact light-weight and portable, could be transported by pull-rod case, put on table and assembly on the trolley.
Ø2. Suitable for small animals, Non-breathing circuit(Jackson or Bains Absorber) is available
Ø3. Selectatec-bar and quick change vaporizer mounting device
Ø4. Professional airtight breathing circuit design, provide the stable gas anesthesia, save anesthesia gas consumption, to ensure a clean operating room and laboratory environment.
Ø5. External and reusable soda lime canister, easily watch and replace soda lime.
Ø6. With Oxygen flush function to ensure that clinical anesthesia demand and
Oxygen supply demand.
Ø7. Anaesthesia CO2 absorber assembly has no dead angle design, fast anesthesia, short recovery and high precision. The CO2 absorber supports both open
loop and closed loop anaesthesia design and provides independent access .
Ø8. Provide a special Pop-Off  valve,Occlusion design, it can  connected to the exhaust gas recovery system and provide a continuous 2 cmH2O negative pressure for the reaspirato airbag ,reducing valve to prevent pressure to hurt the animal, ensure the animal safety .  
Ø9. Provides an accurate oxygen flow meter with a display range of 0 to 4LPM
Ø10. Vaporizer: the output concentration is not affected by the change of flow, pressure and temperature, accurate and reliable, equipped with safety locking device to prevent
anesthetic leakage. Isoflurane,sevoflurane and halothane vaporizer are optional.
Ø11. The hard aluminum solid shell is used, and the surface sanding treatment is
adopted, so that the cleaning and disinfection are more convenient.
Ø12. Visible inspiration and expiration valve
Ø13. Specifically designed to accomodate low flow anesthesia
 

Technical Specification
Application:  0.5-100kg animal
Ventilation mode: Closed,half-closed,half-open
Tidal volume: 10-2000ml
Oxygen source pressure: 0.25~0.65Mpa
Airway pressure scope: 030~60CMH2O
Flow Control: 0-4L/min
Oxygen Flush: 35L/min~75L/min
Pop adjust scope:  Directs the waste anesthetic gas from the machine to a scavenging system. In the completely open position, the pop-off valve will release pressure at 2 cm H2O, while maintain a constant passive volume in the breathing bags. 
Inspiration impedance:   ≦0.6Kpa
Expiration impedance:  ≦0.6Kpa
Absorption tank capacity: 700ml
Monitoring : Airway pressure,Gas source pressure monitoring
I：E:  As doctor need 
BPM: As doctor need 

Configuration list
Main unit     1
Anesthesia Vaporizer     1
Breathing circuit    1
Gas airbag0.5L,1L,3L    3
Reusable Silicon pipeline    1
Oxygen hose    1
Y-connector    1
Trolley     1
Regulator    Optional
Anesthesia ventilator    Optional
Anesthesia monitor    Optional
Non-Breathing circuit    Optional
Veterinary Mask    Optional
Laryngoscope    Optional
Endotracheal intubation    Optional
Exhaust gas recovery tank    Optional